Case study: KEBO Plus TK-30

What is KEBO Plus TK-30

This agent is used to remove old paint and varnish coating from surfaces of concrete, brick, metal and wood. Express SK is good for removing alkyd, acrylic, oil, bitumen and latex-based paints. It is applied evenly over the surface to be treated, left for 1-10 minutes, then easily removed with a spatula or stiff bristle brush, or pressured down by water. One layer of paint and varnish is removed at a time.

How to Use

• Remove dirt prior to application.
• Shake the container well.
• Use a sprayer, brush, or roller to apply the agent onto a surface cleaned of dirt, dust and excessive moisture. If appropriate, immerse the treated article into the agent and leave to react. Should be used at +10C…50C.

Depending on type of paint it takes the agent 1-10 minutes to work. Repeat application if needed. Can be used on wet surfaces.

Should be thoroughly washed down with water solution of calcined soda after use.

When applied by brush, roller or sprayer, estimated consumption rate for Express SK should be around 100-200g/m² (1 liter should be enough for 6-12 m²). Take operating conditions and corrosion strength into account.

Applicable for these surface types

Concrete, brick, metal and wooden surfaces.